Skip to main content Book a Site Visit
    Curved glass enclosure at Museum of Science & Industry installed by Chicago Glass Company of IL
    Signature Capability — Chicago

    Curved Glass & Curved Aluminum Windows.

    We're the only commercial glazier in the Chicago area that fabricates and installs true curved glass paired with custom-bent aluminum framing. Radius storefronts, bowed bay windows, curved entrances, museum-grade enclosures — if it bends, we build it.

    What We Build Curved

    Six scope areas. One curved-work specialist.

    Whether it's a single curved IGU swap or a ground-up radius storefront, fabrication, framing, and install all run through us.

    Bent & Slumped Curved Glass

    True curved lites — tempered, heat-strengthened, laminated, or insulated. Matched to your radius, coating, and thickness spec.

    Custom-Bent Aluminum Framing

    Storefront and window framing rolled to the exact radius of your opening. Anodized, kynar, or painted to match existing finishes.

    Bowed Bay Windows & Turrets

    Historic and contemporary bowed openings — corner turrets, oriel bays, vintage Chicago bay windows. We rebuild what other shops won't touch.

    Curved Entrances & Vestibules

    Radius storefront entries, curved vestibules, and revolving-door enclosures with bent framing and matching curved glass.

    Museum & Institutional Glazing

    Curved display enclosures, exhibit glazing, and architectural showpieces — like our Science Storms install at the Museum of Science & Industry.

    Curved IGU Replacement

    Failed or fogged curved insulated units replaced one-for-one. Field-templated, low-E and argon-fill compatible where the radius allows.

    Curved glass railings

    True curved guards in tempered or laminated glass, with hardware selected for the radius and substrate.

    See curved railing systems
    Why Curved Glass

    The detail buildings get remembered for.

    Curved glazing is one of the few architectural elements that still stops people on the sidewalk. Done right, it's an asset for the life of the building.

    Architectural Showpiece

    A true curved lite reads as a single sweeping plane — no faceted segments, no visible joints. The opening becomes the building's signature.

    Match Historic Openings

    Bowed bays, oriel windows, and turret radii from the 1890s onward — replicated to the original sightline so landmark reviews pass clean.

    Premium Property Value

    Curved glazing is the one detail tenants, buyers, and appraisers immediately notice. It signals investment, not deferred maintenance.

    Engineered for Chicago

    Bent IGUs with low-E coatings, argon fill, and laminated inner lites — built to take lake-effect wind load, freeze-thaw, and afternoon sun.

    Truly Custom Fabrication

    Every lite is templated to the actual opening. No off-the-shelf radii, no "close enough" — the glass fits the building, not the other way around.

    One Accountable Vendor

    Fabrication, custom-bent framing, and field installation all run through Chicago Glass Company of IL. One contract, one warranty, one phone call.

    Curved Work Gallery

    Real curved projects. Real Chicagoland buildings.

    Every photo is a job we templated, fabricated, and installed ourselves — no stock imagery.

    Why Chicago Glass Company

    A skill almost no one carries anymore.

    Curved glazing demands precise radius templating, custom bent aluminum, slumped or bent IGUs, and a crew that can set heavy curved lites without stressing the glass. Most shops sub it out — or just say no. We say yes.

    • The only commercial glazier in the Chicago area fabricating true curved glass + curved aluminum
    • Decades of curved-work experience — from MSI to Northside Chicago bays
    • On-site radius templating (no guessing from a tape measure)
    • In-house coordination with bending shops — one accountable contact
    • Licensed, bonded & insured glazing contractor
    • 5-year IGU seal warranty + 1-year workmanship warranty on every curved install
    Custom-bent aluminum framing being fitted on-site to an existing curved bay window radius by Chicago Glass Company of IL
    Our Curved-Glass Process

    From first call to finished install — six clear steps.

    No mystery, no change-order surprises. You'll know exactly where the project stands at every phase.

    01
    Step 01

    Discovery Call

    Tell us the address, send a few photos, and rough out the size. We'll confirm scope, give a ballpark range, and book a site visit — usually within 48 hours.

    02
    Step 02

    On-Site Templating

    A glazier comes out and physically templates the radius — rigid template, Mylar rub, or 3D scan. This is what separates a curved lite that fits from one that doesn't.

    03
    Step 03

    Spec & Firm Quote

    We return a documented spec — glass make-up, coatings, framing finish, lead time, and a firm price. You see exactly what you're buying before anything is ordered.

    04
    Step 04

    Fabrication & Bending

    Glass is bent or slumped to your template; aluminum is rolled to match. We coordinate the shops directly so radii line up the first time.

    05
    Step 05

    Installation

    Our own crew sets the curved lites, seals the perimeter, and walks the punch list with you on-site. No subs, no finger-pointing.

    06
    Step 06

    Documented Warranty

    Photo-documented hand-off, 5-year IGU seal warranty, and 1-year workmanship coverage. You leave with a paper trail, not a verbal promise.

    Curved Glass FAQ

    What to expect on a curved project.

    Turnaround, templating, and warranty — the questions every property manager and architect asks us first.

    From the field

    Real jobsite photos

    How it works

    Curved glass, template to install.

    We template on-site, bend to your radius, and install without stress cracks.

    1. 01Template
      1 visit

      Physical template of the opening so radius, chord, and rise match the existing frame exactly.

    2. 02Bend & anneal
      3–5 wks

      Slumped and annealed at partner bending furnace to your specified radius; QC checked at edge.

    3. 03Temper (if required)
      Adds 1 wk

      Post-bend tempering for safety-glazed applications; laminated interlayer available.

    4. 04Crate + ship
      1 wk

      Custom radius crate, foam-lined, delivered on our own truck for the last mile.

    5. 05Install
      1–2 days

      Curved-glass certified glaziers set the lite, seal, and finish trim.

    Send Us Your Radius

    Got a curved opening? We'll tell you exactly what's possible.

    Send a few photos and a rough measurement. We'll come template it, spec the glass and the framing, and quote the whole package — no guesswork, no runaround.

    24/7 emergency response · Licensed, bonded & insured · Serving all of Chicagoland

    Spec sheet

    The three numbers we need before we quote a curve.

    Bend radius, chord length, and sagitta (rise) tell us whether the panel gets cold-bent on site or hot-formed in the shop.

    FIG — CURVED GLASS GEOMETRY
    How we spec a curved lite
    Curved glass geometry diagram labeling bend radius, chord length, sagitta, thickness, and center of curvature
    Send us R, L, and S from your drawings — we handle feasibility from there.

    Straight answers