Skip to main content Book a Site Visit
    Foggy Window Repair

    Foggy Window Repair & Insulated Glass Replacement in Chicago

    When the seal on a double-pane window fails, you don't need a new window — you need a new insulated glass unit. We measure, fabricate, and install custom IGUs that drop right back into your existing frame.

    Foggy Glass

    Why your window looks foggy

    You can't Windex the inside of an insulated unit — plenty have tried. Once the seal fails and moisture gets between the panes, that glass is done. The good news: the frame usually isn't. We replace the glass unit and leave the rest of the window alone.

    Commercial window wall after foggy window repair and insulated glass replacement in Chicago
    Window wall, unit by unit.
    Chicago storefront windows with replacement insulated glass units installed
    Storefront IGUs swapped in the existing frame.
    Curtain wall glass replaced after failed insulated glass seals on a Chicago building
    Failed units at height, replaced.
    Restaurant glass wall with new insulated glass units after foggy window repair
    Same frames, new glass.
    Commercial casement window unit showing the insulated glass unit inside the frame
    The unit is the part that fails.
    Aluminum window frame profile showing the glazing pocket for an insulated glass unit
    Glazing pocket — the frame usually stays.
    Signs Your Thermal Panes Have Failed

    If you see any of these, the seal is gone.

    A failed IGU isn't cosmetic — it's costing you energy every day until it's replaced.

    Foggy or cloudy glass

    Condensation trapped between the panes means the seal has failed. The insulating gas is gone — and so is the R-value you paid for.

    Water droplets between the panes

    Moisture inside the IGU (insulated glass unit) is a permanent failure. Cleaning the outside or inside won't fix it — the unit has to be replaced.

    Mineral streaks or haze

    Long-term seal failure leaves chemical deposits etched into the inside surface. Once you see streaks, the glass is done.

    Cracked or shattered pane

    Thermal stress, impact, or a settling frame can crack one or both panes. We replace the IGU — not the whole window.

    Cold drafts near the glass

    A failed seal lets the argon or krypton fill escape. Your window now insulates like single-pane glass from 1965.

    Higher heating & cooling bills

    If your energy bill jumped and nothing else changed, failed thermal panes are a likely culprit — especially in older storefronts and condos.

    How It Works

    Measure. Fabricate. Swap. Done.

    01

    We measure on-site

    Daylight opening, glass thickness, spacer width, Low-E coating, gas fill, tempered vs. annealed — we spec the IGU exactly to your existing frame.

    02

    Custom-fabricated IGU

    Your replacement unit is built to spec with matching Low-E, argon fill, and warm-edge spacer. No off-the-shelf substitutes.

    03

    Clean swap, same frame

    We pull the failed unit, prep the frame, and set the new IGU — usually in a single visit. No drywall work, no new window, no demo.

    04

    10-year seal warranty

    Every IGU we install carries a manufacturer seal warranty. If it fogs again on us, we replace it.

    What we replace.

    • Residential double- and triple-pane window glass (any frame brand)
    • Storefront and commercial IGUs with Low-E and argon fill
    • Tempered safety glass IGUs for doors, sidelites, and tub/shower-adjacent windows
    • Patio door and slider glass panels
    • Skylight and overhead glazing units
    • Curtain wall and high-rise IGU replacements (see our high-rise page)
    From the field

    Real jobsite photos

    How it works

    From foggy window to clear IGU — no frame swap.

    We replace the failed sealed unit inside the existing frame. Faster, cleaner, cheaper.

    1. 01Send photos
      5 min

      Snap the failed unit and any manufacturer stickers. Text or upload to /quote.

    2. 02Field measure
      1 visit

      We verify glass thickness, spacer, low-E, and gas fill so the replacement matches the rest of the building.

    3. 03Order IGU
      5–10 days

      Custom-built sealed unit with warm-edge spacer, argon fill, and matching low-E coating.

    4. 04Swap the unit
      20–45 min

      Pull the old glass, seat the new IGU in the existing frame, re-glaze, re-seal.

    5. 05Warranty
      10 yr seal

      Registered manufacturer warranty on the IGU plus our workmanship warranty.

    Service Area

    Replacing foggy panes across Chicagoland.

    Chicago, Oak Park, Evanston, Naperville, Downers Grove, Schaumburg, Oak Brook, Elmhurst, and every suburb in between.

    Straight answers