Skip to main content Book a site visit · we confirm who and when
    Fire-rated glazing · quote only

    20-Minute Fire-Rated Glass

    Quoted as a complete listed assembly: the glass, the frame, the glazing tape and the anchorage together.

    What it is

    A fire rating is a time. A 20-minute rating means the assembly it belongs to was tested and listed for 20 minutes. The number applies to that listed assembly as a whole, not to glass installed in any frame.

    We quote it that way. The glass, the frame, the glazing tape and the anchorage are matched to the same listed system. We work from the listing for your assembly.

    Twenty minutes is where our fire-rated range starts. It runs from 20-minute vision lites up to 3-hour full wall assemblies. See our fire-rated glazing page for the whole range.

    Manufacturer documents

    Reference specifications

    These published examples explain what to check. CGC has not selected or confirmed these manufacturers or products for your order. They are not a project submittal, a CGC certification or proof of the system shown in our project photo.

    Send the drawings, required rating and existing frame label. We’ll confirm the actual glass, frame, glazing materials and applicable listing in the written quote. The authority having jurisdiction reviews the assembly for your project.

    FireLite NT · 20-minute reference

    Technical Glass Products (TGP) · R230302 · © 2023 · checked November 20, 2026

    Pages 1–3; 20-to-60-minute rows on page 2

    Manufacturer PDF
    Material
    Glass ceramic with surface-applied fire-rated film
    Overall thickness
    3/16 in. (5 mm), for this named product only
    Non-temperature-rise doors
    Maximum exposed area 3,204 sq. in.; maximum exposed width 36 in. and height 89 in.
    Temperature-rise doors
    Maximum exposed area 100 sq. in.; maximum exposed width 12 in. and height 33 in.
    Other than doors
    Maximum exposed area 3,325 sq. in.; maximum exposed width and height 95 in.

    Limits and compatibility

    • These are TGP's published limits for FireLite NT, not a glass size or product selected for your job. Area, width and height limits apply together; the frame manufacturer must confirm maximum tested glass sizes and required stop height.
    • FireLite NT is not a barrier to radiant heat and does not meet ASTM E119 or UL 263. A time rating alone does not establish suitability for a fire-resistive wall.
    • Page 3 calls for appropriate fire-rated framing and an approved glazing compound: closed-cell PVC tape or DAP 33 putty. This is product-specific guidance, not permission to substitute materials in another listed system.

    Where we use it

    • Openings where the project drawings or the label on the existing frame call for a 20-minute rating

    From the field

    The rating belongs to the assembly

    The glass, the frame, the glazing tape and the anchorage have to match the same listed system. A rated lite set in the wrong frame or with the wrong tape does not carry the assembly's rating.

    Your drawings set the rating

    The code and the project drawings set the rating an opening needs, and the authority having jurisdiction signs off. If the rating is on the drawings or on the label of the existing frame, send it. If you cannot find it, call us.

    Each listing has its own limits

    Each listed system has its own limits on glass size, framing and installation. We work from the listing for your assembly, not from a rule of thumb.

    Existing frames need a look

    The glass has to match the listing of the frame it goes into. Send photos and sizes of the frame and we will tell you what else we need to confirm before we quote.

    Written estimates

    We quote in writing and keep materials and labor separate. Timing depends on scope and availability and is confirmed in the written quote.

    2-hour fire-rated glass wall at Wrigley Field in Chicago
    CGC's 2-hour fire-rated glass wall at Wrigley Field. This project shows a different rating from the glass on this page.

    Project request

    Request this system for your project

    Send the opening, location, and any drawings you have. We’ll review the system and call you back.

    Written estimate
    Tell us about the job.

    For emergencies, call 708-800-7120. Privacy Policy

    Frequently Asked Questions

    What does 20-minute fire-rated glass mean?+

    It means the glass is part of an assembly that was tested and listed for 20 minutes. The rating applies to the listed assembly as a whole: glass, frame, glazing tape and anchorage together.

    How do I know which rating my opening needs?+

    The building code and the project drawings set it, and the authority having jurisdiction signs off. Send us the rating shown on the drawings or on the existing frame label. If you cannot find it, call 708-800-7120.

    Does the glass have to match the frame?+

    Yes. A listing covers a specific combination of glass, frame, glazing tape and anchorage, so we match the glass to the frame it is going into before we quote.

    What will it cost and how long will it take?+

    Every job is quoted in writing. Estimates separate materials and labor, and timing depends on scope and availability. We confirm both in the quote.

    Send us the opening and the project requirements.

    We quote in writing and keep materials and labor separate. Timing depends on scope and availability and is confirmed in the written quote.

    WhatsApp photos